KTM 390 ’20-’24 Adventure/RC Cruise Control Cruise Kit

Compatibility

• 2020 – 2024 390 Adventure
• 2020 – 2024 RC390

2025 390 ADV R – This bike will be getting optional Factory cruise soon and will not be supported.

2025 390 Enduro R – Currently untested / unsupported

Choice of switch

Factory 890

A factory KTM 890 combination switch is provided. This has all the same features plus cruise control. The combination switch is modified and rewired to match the 390 plugs.

This option is based on KTM 76011270100, we change the connectors for the 390, additionally this switch is 5cm shorter and requires careful routing for good fitment.

Triple Switch

A 3 button switch for controlling the cruise functions is included. Fully watertight and durable. Mounts directly to standard 22mm handlebars with a fully opening bracket. Increase and Decrease speed by 3kph with each press (configurable). This option provides 3 buttons:

• Resume / Increase
• Cancel
• SET/ Decrease

LED lights and other upgrade compatibility

This kit is 100% compatible with any aftermarket lights and kits. No wire splicing or messing with brake wires.

Cruise Stop Conditions

We know it’s paramount on motorbikes to quickly kill the cruise control in as many situations as possible. Our module will disengage cruise control for any one of the following conditions

• Engine RPM signal falls below 1000 or above defined max
• Front brake lever**
• Clutch lever is pulled
• Bike transmission is in first gear or neutral
• Any one of the required CANBUS packets are not updated within 1000 milliseconds
• A difference of 10% between the front and rear wheel speed

**The 390 CANBUS does not provide rear brake information

Configurability

The module has a weather tight USB-C connector for changing various settings such as speed increment size, PID gain, and throttle limits.

Diagnostic Port

This kit uses the diagnostic port of your bike. If you want a second port for OBD and Off Road dongles, see addon section.

Install Difficulty

To install this kit you must remove the tank and split the headlight housing. About 2 hours install time with proper tools. T-harness will override the throttle signals and diagnostic connector will collect important speed data.

Manual /  Install

Click here for PDF Installation manual

Customer Videos

ADV Matt:

Lookout Moto:

VirajVrooms:

One Old Man Riding: